Equipment Introduction

Equipment No: 20606M02

Balder Hoodie

Men's Thermal Mid-Layer

2 000 kr

The men's Balder Hoodie is a technical hooded mid-layer in a streamlined design that will keep you warm on the coldest days of winter. We have kept the details to a minimum to make the Balder move and work effortlessly under a shell garment. The inner layer is comfortable against the skin and stretchy to ensure good flexibility, with thumb loops to keep the sleeves in place. The fabric is a mix between polyester and recycled wool, which makes it durable and soft.

Charcoal

Notify Me

Size Guide

Fits true to size. Take your normal size.
Regular fit for layering.
Medium size center back length: 77cm
Regular hem for tight coverage.
Slight extended sleeve cuff for full coverage.
Mid-weight, breathable fleece, with little stretch fabric.
Model wears size Medium.
Model has a size 32 waist and height 185cm.
Size help and equipment measurements

Use this chart to see what size you have

	XS	S	M	L	XL	XXL
Body Height	171 cm	175 cm	179 cm	183 cm	187 cm	191 cm
1. Chest	83-88 cm	89-94 cm	95-100 cm	101-106 cm	107-112 cm	113-118 cm
2. Waist	71-76 cm	77-82 cm	83-88 cm	89-94 cm	95-100 cm	101-106 cm
3. Sleeve Length	79,5 cm	82 cm	84,5 cm	87 cm	89,5 cm	92 cm
4. Back Length	43,5 cm	44,5 cm	45,5 cm	46,5 cm	47,5 cm	48,5 cm
5. Seat	87-92 cm	93-98 cm	99-104 cm	105-110 cm	111-116 cm	117-122 cm
6. Inseam	79 cm	81 cm	83 cm	85 cm	87 cm	88 cm

A step by step guide on how our measurements are taken

Chest Place the measuring tape under your arms and across your chest at the widest part. Take a deep breath to make sure that the measuring tape is not placed too tight.
Waist Place the measuring tape around your waist at the smallest point, normally at the umbilicus, take a deep relaxing breath to make sure that the measuring tape is not placed too tight.
Sleeve Length Find the highest neck vertebra with your fingers, start from this point, and place the measuring tape at this point, then let the measuring tape follow your shoulder and down along the arm, slightly bend your arm and place the measuring tape on the elbow and down the wrist vertebra.
Back Length Find the highest neck vertebra with your fingers, start from this point and measure down to the same place as you measured your waist. (Tip: You can use a webbing around your waist as a mark, then you will know for sure how far down you should measure.)
Seat Place the measuring tape around your seat at the widest point. Make sure that the tape is not placed too tight.
Inseam Place the measuring at groin, measure from this point down to your inner foot ankle.

Close Size Guide

Equipment Introduction

Equipment Key Features

Advantage

The front zip does not go all the way up to prevent chafing.
Shaped to stay in place even when you lift your arms.
Overlap collar for a comfortable heat seal.
Extended back for lower back protection.
Thumb loops keep the sleeves in the right place
Two zipped pockets for secure storage.
The hood is fitted to be worn under a helmet.

Key Figures

Weight (Men's M): 554g

Hoodie

46% Recycled Wool, 36% Polyester, 16% Polyamide, 3% Other Fibers

Washing & Care

Machine wash on gentle cycle at 30°C or less. Do not bleach. Iron at low temperature. Dry Clean. Dry Flat.

Materials & Care

Hoodie

46% Recycled Wool, 36% Polyester, 16% Polyamide, 3% Other Fibers

Washing & Care

Machine wash on gentle cycle at 30°C or less. Do not bleach. Iron at low temperature. Dry Clean. Dry Flat.

Materials & Care

Hoodie

46% Recycled Wool, 36% Polyester, 16% Polyamide, 3% Other Fibers

Washing & Care

Machine wash on gentle cycle at 30°C or less. Do not bleach. Iron at low temperature. Dry Clean. Dry Flat.

Customer Service

Free Shipping

Free shipping available.

Free Returns

If you are unsatisfied with your purchase, return it free of charge within 30 days for a full refund

RePack

A sustainable shipping solution

Service & Repairs

Extend the life of your equipment by sending it to our repair shop

Equipment Introduction